If you are having trouble selecting door hardware, our Door Hardware Buying Guide is a super helpful tool.
This blog will provide you with all the information you need to know about buying door hardware, as well as a video how-to.
Door Hardware Buying Guide
When considering new door hardware, many people's first concern is finding the perfect style and finish to complement their home. That’s certainly important, and for many, choosing the look of their new hardware is the fun part. But what’s equally or even more important to consider is the layout and functionality of the hardware, which is the step most customers find confusing. To take the guesswork out of the process, we’ve created this simple guide to choosing the correct door hardware for your home.
Be Deliberate with Preparations
An old adage in carpentry is “measure twice, cut once.” A similar rule applies with buying door hardware: take all of your measurements and then double check that they are correct before making your purchase. This is important because our Emtek door hardware is non-refundable. If you have any questions about the process, reach out to our customer service team before you buy. Having a second set of eyes on the problem can make all the difference in the world.
Door Hardware Functionality
The first thing you’ll want to consider when buying door hardware is the location and purpose of the door with which the hardware will be used. Are you outfitting a closet door? A front entryway? A bathroom door? The door hardware will correspond with the door’s function. The main types of door hardware functionality are: keyed, passage, privacy, and dummy. The graphic below explains the differences.
Next, determine your door’s “handing,” which is just another way of saying look at which way the door opens. Handing is always determined by facing the door from its exterior. (A note about door handing: Generally, if you’re standing on the exterior of the door, it will open away from you, although this is not the case for closets, pantries, and other similar locations. If you’re on the exterior of the door and the door opens towards you, that doesn’t change the handing.)
Handing boils down to one simple rule: If, when facing the door, the hinges are on your left, the door has left handing. If the hinges are on the right, the door has right handing.
Blank Door or Pre-Drilled?
Because different door hardware requires different borehole arrangements, it’s important to think about whether you’ll be buying hardware for a door that already has holes drilled or if you’ll be drilling the holes yourself. If you’re simply replacing the hardware in an existing door, you’ll need to measure its boreholes. New doors are often either blank or have boreholes pre-drilled. If you’re planning to buy a door with pre-drilled holes, make sure to contact the manufacturer to get accurate measurements. Avoid making an assumption about the borehole measurements because measurements, especially backset, can vary between manufacturers.
Taking Measurements: Backset, Door Thickness, Borehole Spacing
If you plan on using a door with holes that have previously been drilled, you will need to take the following measurements:
Door backset refers to the distance from the door edge to the center of the bore hole. Most backsets measure either 2 3/8 inches or 2 3/4 inches. (If your door backset measurement isn’t 2 3/8 inches or 2 3/4 inches, call our customer service team). Watch our video below for a complete visual on measuring your backset.
Most doors come in a standard thickness of 1 3/4 inches unless they are custom built. When buying front entrance door sets, there’s no need to measure the thickness of your door if you’re using a standard door.
Interior doors have a little bit more variation. While most interior doors are 1 3/4 inches, some measure 1 3/8 inches. When replacing the hardware on an interior door, make sure to measure its thickness. Our door hardware sets will come with an extender to accommodate both door thicknesses, but nothing outside of the two.
For door hardware that requires two boreholes (this usually includes hardware with locks and deadbolts) it’s necessary to measure the distance between the boreholes as well as the width of the boreholes themselves. Doors pre-drilled to industry standards have two bore holes, each 2 1/8th inches in width, spaced 5 1/2 inches from the center of one borehole to the center of the next borehole.
Some types of interior hardware require a closer center-to-center measure, while other hardware sets require smaller boreholes. Keep this possibility in mind when shopping for door hardware because some hardware isn’t compatible with standard door borehole format.
The final consideration is keying. All of our Emtek door hardware sets use a Schlage C Keyway and each set comes with two keys. If you plan on purchasing multiple keyed door hardware sets and you want them all to operate with the same key, reach out to our customer service team. They can set you up.
And that’s it! With this information in hand, you should be all set to buy your new hardware.
If you have any additional door hardware questions, please reach out to our Customer Support team.